Starlink Mini Magnetic Mount with 4mm Acrylic Shield

$89.99

The Starlink Mini Acrylic Shield Mount combines a black frame, a clear acrylic cover listed as 4mm thick and four magnetic bases in one mounting assembly. Place it on a suitable steel surface after checking full magnet contact and battery fit; the Starlink Mini and any third-party battery are not included.

BrandSTARGEAR
Amazon manufacturer part numberSGHK-STG600E
Product typeMagnetic mount with clear cover for Starlink Mini
CoverClear acrylic, listed as 4mm thick
Magnetic basesFour
Mounting surfaceSuitable clean ferromagnetic steel surface
Battery arrangementSpace for a compatible separate third-party battery; fit must be checked
Included itemOne magnetic mount assembly with protective cover
Starlink Mini and batteryNot included
Category: Brand:

Starlink Mini Acrylic Shield Mount for Covered Steel-Surface Setups

A Magnetic Frame with a Clear Cover

The Starlink Mini Acrylic Shield Mount combines a black metal frame, a clear cover listed as 4mm acrylic and four round magnetic bases in one Starlink Mini mounting assembly. The cover sits over the Mini in the assembled product, while the frame holds the dish and provides a carry handle for moving the unit between suitable locations. This design is distinct from adhesive mounting plates and open-frame magnetic mounts because the clear cover is part of the pictured assembly.

Check the Roof or Mounting Surface

Place the magnets of the Starlink Mini Acrylic Shield Mount only on a clean, suitable ferromagnetic steel surface with enough flat contact area for all four bases. Glass, aluminum and fiberglass do not provide direct magnetic attachment; a separately sourced magnetic metal plate would need its own fit and installation check. The four magnetic bases are visible in the product images, but their presence does not establish a vehicle-speed rating or a universal holding load. Before each use, inspect the surface, magnet contact, cover fasteners and surrounding clearance, then reassess the placement if conditions change.

What the Acrylic Cover Adds

The transparent cover places a physical barrier above the Starlink Mini’s exposed face and allows you to see the device beneath it. The Starlink Mini Acrylic Shield Mount uses an acrylic panel listed as 4mm thick; no verified hail-impact, UV-life or whole-assembly weather-protection test is provided. Keep drainage, cable routing and the Mini’s normal operating requirements in mind when choosing a position; the cover does not replace the device instructions.

Space for a Separate Battery

The frame shows an open central area intended to accommodate a compatible third-party battery arrangement behind the Mini. Battery sizes and attachment styles vary, so check the actual battery and Mini fit before buying rather than assuming every third-party pack will fit. The Starlink Mini Acrylic Shield Mount is a mounting accessory; a battery, charging circuit and Starlink Mini are not part of the stated one-mount package.

Assembly, Carrying and Placement

The listing shows the frame, corner pieces, clear cover, magnetic bases and screw assembly steps; follow the supplied hardware and product instructions when putting them together. Seat the Mini correctly within the frame, secure the cover and confirm that the four bases make appropriate contact before leaving the setup in place. Use the built-in handle to carry or reposition the assembly after lifting it from the surface, rather than dragging the magnets across the finish. For a vehicle or outdoor location, check relevant mounting rules and conditions yourself; this listing does not substantiate a safe driving speed.

Why You’ll Love It

  • A clear acrylic cover is included in the magnetic-mount design.
  • Four visible magnetic bases suit appropriately prepared steel surfaces.
  • The frame includes a handle for carrying the assembly.
  • The open center leaves room to assess a compatible separate battery.
  • One covered mount gives this item a distinct purpose from plain plates.

Frequently Asked Questions

Q1: Does this mount fit Starlink Mini or a Standard dish?

A1: The Starlink Mini Acrylic Shield Mount is pictured for Starlink Mini. It is not listed as a Standard-series mount; check your device before ordering.

Q2: Can I put it directly on aluminum, glass or fiberglass?

A2: No. Magnets need a suitable ferromagnetic steel surface; another surface requires a separately chosen metal plate and a secure installation.

Q3: Is a compatible third-party battery included?

A3: No. The Starlink Mini Acrylic Shield Mount has space intended for an appropriate separate battery, but you must check the battery’s size and fit.

Q4: Can I leave the mount on a vehicle while driving?

A4: No tested safe driving speed is available for this kit. Check local mounting rules and the actual hold; do not treat a magnet claim as a speed rating.

Q5: Is the 4mm cover proven hailproof or UV resistant?

A5: No independent impact or UV-life result is available for the Starlink Mini Acrylic Shield Mount. Its clear panel covers the Mini without a verified protection rating.

Reviews

There are no reviews yet.

Be the first to review “Starlink Mini Magnetic Mount with 4mm Acrylic Shield”

Your email address will not be published. Required fields are marked *

Secure Payments
Secure Payments. Encrypted & Protected.
Worldwide Shipping
Shipping to 200+ Countries & Regions.
Gifts & Sales
Curated Gifts for Every Occasion.
24/7 Support
Live Support via Chat, Email, or Phone.

Starlink Mini Acrylic Shield Mount showing four magnetic bases and the covered frame above a vehicle roof
Starlink Mini Magnetic Mount with 4mm Acrylic Shield

$89.99

Add to cart