STARGEAR Starlink Mini Battery Adapter for DEWALT 20V MAX with 9.8 ft 18AWG DC Cable
$45.99
Power your Starlink Mini from a compatible DEWALT 20V MAX or listed 18V DCB battery with this STARGEAR adapter and 3 m (9.8 ft) 18AWG DC cable. Check the battery level on the display and use the on/off switch to control power at the pack. Battery sold separately.
| Brand | STARGEAR |
|---|---|
| Model | SGHK-STG37DC-3MY |
| Compatible device | Starlink Mini |
| Compatible battery platform | DEWALT 20V MAX and listed 18V DCB lithium-ion batteries |
| Listed battery models | DCB182, DCB183, DCB201, DCB203, DCB204, DCB206, DCB208, DCB230, DCB240 |
| Cable | Detachable 3 m (9.8 ft), 18AWG DC power cable |
| Controls | Digital battery level display and on/off switch |
| Battery protection | Over-discharge protection |
| Color | Yellow |
| In the box | 1 battery adapter and 1 DC power cable |
| Sold separately | Battery and Starlink Mini |
Starlink Mini Battery Adapter for DEWALT 20V Packs
The STARGEAR Starlink Mini Battery Adapter lets you power the dish from a compatible DEWALT tool battery while keeping the pack within reach at your workbench or campsite.
The kit pairs a yellow slide-on adapter with a matching 3 m (9.8 ft) DC cable.
Bring your own compatible battery and Starlink Mini.
Check the model printed on your battery
Look for the DCB model number on your battery label before ordering.
STARGEAR lists compatible lithium-ion packs from the DEWALT 20V MAX and 18V DCB ranges.
The listed models include DCB182, DCB183, DCB201, DCB203, DCB204, DCB206, DCB208, DCB230 and DCB240.
If yours has a different model number, confirm the fit before buying.
Place the battery where you can reach it
At a campsite, the long cord lets you put the dish in an open spot while keeping the battery near your table to check the display or swap packs.
When measuring the route, allow for the height of the table and leave a little slack at each plug.
Both ends of the included 18AWG cable have round DC plugs.
Connect the Starlink Mini Battery Adapter
Slide the adapter onto the battery rails until it seats, then push one end of the yellow cable fully into the adapter’s side socket.
Connect the other end to the DC power input on the Mini. Use the power button beside the display to turn the Mini on.

Read the display and switch off between sessions
The digital display on the Starlink Mini Battery Adapter shows the battery level, so you can check the pack while the dish stays in position.
STARGEAR includes over-discharge protection in the adapter. Use the on/off switch when you finish a session, and use your compatible battery charger when the pack needs recharging.
Why You’ll Love It
- Keep the pack within reach while the 3 m cable runs to the dish.
- Read the battery level at the adapter while the Mini stays in place.
- Switch power off between sessions without removing the battery.
- Carry the adapter and detachable yellow cord together in your tool bag.
FAQ
Q1: Which battery packs fit the Starlink Mini Battery Adapter?
A1: Match the DCB number on your DEWALT lithium-ion pack to the compatibility list above. It includes 20V MAX models such as DCB203 and DCB204.
Q2: What comes in the box, and can I choose a different length?
A2: This kit comes in one length and includes a yellow adapter and a 3 m (9.8 ft) 18AWG DC cable. The battery, Mini and pipe mount are not included.
Q3: How do I turn the Mini off without unplugging the cable?
A3: The button beside the display is marked “Hold 3s.” Use it to switch power off while leaving the battery and cable connected.
Q4: Will the Starlink Mini Battery Adapter recharge my tool battery?
A4: The adapter draws power from the battery to run the Mini. Remove the pack and use its compatible DEWALT charger when it needs recharging.
Q5: How long will my Mini run on one battery?
A5: Runtime depends on the battery capacity, its state of charge and the Mini’s power use. Check the adapter’s level display to decide when to swap packs.























Reviews
There are no reviews yet.