Starlink Mini US Flag Mount Plates, 4-Pack for Standard 4/4X

$29.99

The STARGEAR Starlink Mini US Flag Mount Plates add four adhesive metal contact points for a compatible Starlink Mini or Standard 4/4X magnetic mount on a suitable aluminum or glass vehicle roof. Each 2.7-inch plate has an American flag face; the plates are not magnets, and the magnetic mount and Starlink hardware are sold separately.

BrandSTARGEAR
ProductAdhesive metal contact plates for a compatible magnetic mount
DesignAmerican Flag / US Flag
Quantity4 plates
Approximate plate size2.7 in / 70 mm diameter; 0.08 in / 2 mm thick
Intended mountsCompatible four-contact-point Starlink Mini or Standard 4/4X magnetic mounts
Suitable installation surfaceAn aluminum or glass vehicle roof confirmed suitable for adhesive mounting
Special FeatureSelf-adhesive metal contact plates; US flag design; no drilling for plate installation
Compatible DevicesCompatible four-contact-point magnetic mounts for Starlink Mini and Standard 4/4X
Included Components4 x self-adhesive US flag metal mounting plates
ColorAmerican Flag (US Flag design)
Site SKUSGHK-METALPADS-D70-4PS-AF
Not includedMagnetic mount and Starlink equipment
Category: Brand:

Starlink Mini US Flag Mount Plates for Magnetic Roof Mounts

Starlink Mini US Flag Mount Plates provide four adhesive metal contact points for a separate magnetic mount on a suitable vehicle roof. Their American flag pattern makes the contact points visible while the mounting function remains the same as the Black and One Nation plate designs.

Add Contact Points to Aluminum or Glass

A magnetic mount cannot attach directly to an aluminum or glass roof because those surfaces do not provide the steel contact points its magnets need. These adhesive plates add four metal contact points when the roof surface and your magnetic mount are suitable for this installation. The plates themselves are not magnets, and this four-piece pack does not include a Starlink dish or a magnetic mount.

Match the Plates to Your Mount

Starlink Mini US Flag Mount Plates are intended for compatible Starlink Mini and Standard 4/4X magnetic mounting setups with four contact points. Check the spacing and size of the magnets on your separate mount against the four planned plate positions before removing any adhesive liners. Each plate is approximately 2.7 inches (70 mm) across and 0.08 inches (2 mm) thick, based on the listed product dimensions. Compatibility refers to the magnetic mount’s contact arrangement, not to a power cable, satellite connector, or a universal fit with every Starlink accessory.

Install Starlink Mini US Flag Mount Plates

Choose a smooth, clean, dry area of aluminum or glass that is suitable for adhesive mounting, and confirm that the roof finish is sound. Mark all four contact positions with the magnetic mount first, leaving enough room for the dish and the surrounding roof features. Remove dust, oil, wax, moisture, and loose coating from the selected area, then peel each liner and press its plate firmly into position. Follow the adhesive’s application and curing instructions before loading the plates; avoid repositioning them after they have bonded. For a vehicle installation, also follow the vehicle and magnetic mount instructions for the specific surface and intended use.

A Visible US Flag Finish

Starlink Mini US Flag Mount Plates differ from the Black and One Nation versions in their American flag design, not in the four-plate installation concept. It gives buyers a clear visual choice for a compatible mounting setup while keeping the practical purpose of each plate easy to understand. The decorative face does not add magnetism, change the underlying Starlink hardware, or establish a tested driving-speed rating.

Why You’ll Love It

  • Four adhesive metal contact points for a compatible magnetic mount.
  • US flag graphics on the visible faces of all four plates.
  • Designed for suitable aluminum or glass vehicle roofs.
  • No drilling is needed for the adhesive plate installation.
  • Works with appropriately matched Mini or Standard 4/4X magnetic mounts.

Starlink Mini US Flag Mount Plates infographic with surface icons, mount scenes, plate dimensions, installation steps, and vehicle images

FAQ

Q1: Are these plates magnets, and can I use them by themselves?

A1: No. Starlink Mini US Flag Mount Plates are metal contact pads; you also need a compatible magnetic mount and your Starlink equipment.

Q2: Will Starlink Mini US Flag Mount Plates work with a Standard 4/4X mount?

A2: They are intended for compatible four-contact-point magnetic mounts for those models. Check your mount’s magnet spacing and plate placement before applying the adhesive.

Q3: Can I install the plates on an aluminum or glass vehicle roof?

A3: Yes, if the specific surface is smooth, sound, clean, dry, and suitable for adhesive mounting. Follow the roof and mount installation instructions.

Q4: What comes in the pack, and are the dish or magnets included?

A4: The pack contains four US flag adhesive metal plates. The magnetic mount, Starlink dish, and other Starlink hardware are separate.

Q5: How is this version different from the Black or One Nation plates?

A5: Starlink Mini US Flag Mount Plates have an American flag face. The referenced designs share the same mounting function, size, and material.

Reviews

There are no reviews yet.

Be the first to review “Starlink Mini US Flag Mount Plates, 4-Pack for Standard 4/4X”

Your email address will not be published. Required fields are marked *

Secure Payments
Secure Payments. Encrypted & Protected.
Worldwide Shipping
Shipping to 200+ Countries & Regions.
Gifts & Sales
Curated Gifts for Every Occasion.
24/7 Support
Live Support via Chat, Email, or Phone.

Starlink Mini US Flag Mount Plates shown as four roof contact points beneath a separate magnetic mount
Starlink Mini US Flag Mount Plates, 4-Pack for Standard 4/4X

$29.99

Add to cart