Starlink Mini Flag Mount Plates, US Flag 4-Pack

$29.99

These Starlink Mini Flag Mount Plates provide four adhesive metal contact pads for a compatible magnetic roof mount on a suitable aluminum or glass surface. This is the same US flag four-pack sold on our other STARGEAR listing; the magnetic mount and Starlink equipment are separate.

BrandSTARGEAR
ProductAdhesive metal contact plates for a separate compatible magnetic mount
Design / ColorUS flag face
Quantity4 plates
Approximate plate size70 mm / 2.7 in diameter; 2 mm / 0.08 in thick
Intended mounting setupCompatible four-contact-point mount for Starlink Mini or Standard 4/4X
SurfaceSuitable aluminum or glass vehicle roof, subject to surface and mount checks
Included Components4 × US flag adhesive metal contact plates
Not IncludedMagnetic mount, Starlink dish, and other Starlink hardware
Site product identifierSGHK-METALPADS-D70-4PS-AF
Category: Brand:

Starlink Mini Flag Mount Plates for a Four-Point Roof Setup

Starlink Mini Flag Mount Plates provide four round metal contact points for a separately purchased four-foot magnetic mount on a suitable vehicle roof.

This US flag four-pack is the same STARGEAR plate set offered on our Starlink Mini US Flag Mount Plates page; it is another purchase route for the same item.

Starlink Mini Flag Mount Plates are adhesive-backed metal contact surfaces, not magnets, and they do not attach a Starlink dish to a roof without a compatible mount.

What the Four Plates Do

Each plate gives one foot of a compatible magnetic bracket a metal surface to meet on an aluminum or glass roof that lacks a magnetic contact point.

Match all four positions to your own mount before removing any backing, because the plates cannot correct a mismatch in magnet size or spacing.

The American flag design appears on the plate faces; the printed design does not change the mounting function or make this a different model from our other listing.

Check Your Mount and Surface

Starlink Mini Flag Mount Plates are intended for compatible four-contact-point magnetic mounts used with Starlink Mini or Standard 4/4X, which some older listings call Gen 3.

Compatibility refers to the separate mount’s contact layout and the selected roof surface, rather than direct attachment to the dish or universal fit with every magnetic bracket.

Choose a smooth, sound, clean, dry surface suitable for adhesive application, and check the vehicle finish and mount instructions before placing the plates.

The illustrations show aluminum and glass vehicle roofs, but they do not establish a tested fit for every coating, roof shape, temperature, or driving condition.

Four-Piece Set and Listed Dimensions

A set of Starlink Mini Flag Mount Plates contains four round US flag adhesive metal plates; a magnetic bracket, Starlink hardware, and the illustrated vehicle are separate.

Listed product imagery shows each plate at approximately 70 mm (2.7 in) across and 2 mm (0.08 in) thick; check that size against your mount.

This page and the other US flag plate listing use the same site product identifier, SGHK-METALPADS-D70-4PS-AF, and show the same four-piece set.

Installation and Use

Before installing Starlink Mini Flag Mount Plates, place your separate magnetic mount over the intended area and mark all four contact points around nearby roof features.

Prepare the selected spots according to the adhesive supplier’s guidance, peel the liners, and press the plates into the previously marked positions.

Follow the adhesive and mount makers’ application, curing, and operating instructions before use; a universal cure time or safe vehicle speed has not been verified here.

Inspect the roof finish, plates, and separate mount before each use, and avoid treating the weather or speed illustrations as tested performance ratings.

Why You’ll Love It

  • Four metal contact points for a compatible magnetic mount.
  • US flag faces identify this four-piece plate design.
  • Adhesive plate placement does not require drilling.
  • Listed dimensions help compare the plates with your mount.
  • Suitable for a confirmed aluminum or glass roof application.

Starlink Mini Flag Mount Plates infographic with surface icons, mount scenes, dimensions, installation steps and vehicle images

FAQ

Q1: Are these plates magnets, and can I place a Starlink Mini directly on them?

A1: No. Starlink Mini Flag Mount Plates are metal contact pads; you also need a compatible magnetic mount and your Starlink equipment.

Q2: Will the plates work with a Standard 4/4X or Gen 3 magnetic mount?

A2: They are intended for compatible four-contact-point mounts used with Starlink Mini or Standard 4/4X, also called Gen 3 in older listings. Check spacing first.

Q3: Can I use them on an aluminum or glass vehicle roof?

A3: Aluminum and glass roofs are illustrated. Use them only when the particular surface is suitable for adhesive mounting and your mount instructions permit it.

Q4: What comes in the pack, and is the other US flag listing different?

A4: Starlink Mini Flag Mount Plates come as four US flag adhesive metal pads. This is the same set as our other listing; no magnetic bracket or dish is included.

Q5: Do the images prove a vehicle speed or weather rating?

A5: No verified speed, holding-force, or weather rating is available for this set. Follow the adhesive and mount makers’ instructions for your installation.

Reviews

There are no reviews yet.

Be the first to review “Starlink Mini Flag Mount Plates, US Flag 4-Pack”

Your email address will not be published. Required fields are marked *

Secure Payments
Secure Payments. Encrypted & Protected.
Worldwide Shipping
Shipping to 200+ Countries & Regions.
Gifts & Sales
Curated Gifts for Every Occasion.
24/7 Support
Live Support via Chat, Email, or Phone.

Starlink Mini US Flag Mount Plates shown as four roof contact points beneath a separate magnetic mount
Starlink Mini Flag Mount Plates, US Flag 4-Pack

$29.99

Add to cart