Starlink Flat High Performance SPX to RJ45 Adapter Pair

$105.99

Use a compatible RJ45 cable to connect your Flat High Performance dish and its dedicated power supply with this two-piece SPX adapter kit. Each adapter has a female RJ45 socket, and the kit includes threaded housings with gaskets and end caps.

BrandSTARGEAR
Manufacturer Part NumberSG-FHP-SPX-RJ45-2pcs
Product TypeSPX to RJ45 adapter pair
Compatible DevicesStarlink Flat High Performance dish and dedicated power supply, also known as Performance (Gen 2)
Dish-Side AdapterWide-housing SPX plug to female RJ45 socket
Power-Supply-Side AdapterSlim-housing SPX plug to female RJ45 socket
Adapter Lead Gauge22 AWG, as specified by STARGEAR
Cable JacketPVC
ColorBlack
Included Components1 dish-side adapter, 1 power-supply-side adapter, threaded RJ45 housings, gaskets and end caps
Required SeparatelyCompatible Ethernet cable with RJ45 plugs at both ends

Starlink FHP RJ45 Adapter Pair for the Dish and Power Supply

Use the Starlink FHP RJ45 Adapter Pair to run a compatible RJ45 cable between your Flat High Performance dish and its dedicated power supply. One adapter fits each end of the run.

The adapters let you plan the route around your installation and leave the original Starlink cable intact. The RJ45 cable that goes between them is supplied separately.

Check Your Flat High Performance Kit

This pair fits the dish and dedicated power supply from the Starlink Flat High Performance kit, now called Performance (Gen 2). Check the kit name before ordering, especially if you use another rectangular Starlink dish.

Choose model-specific accessories for Enterprise, Standard Actuated, Standard 4, Standard 4 X or Mini equipment. The plug shape alone is an incomplete guide to compatibility.

Match Each Adapter to Its Port

The adapter with the wider plug housing goes at the dish. The adapter with the slimmer plug housing goes at the dedicated power supply.

Each lead ends in a female RJ45 socket. The Starlink FHP RJ45 Adapter Pair goes on the powered dish side of the system.

If you need to connect a router, use the separate Ethernet connection on the power supply as described in your Starlink kit guide.

Choose the Cable Between the Adapters

Use a compatible cable with an RJ45 plug at each end. Before buying it, check that both plugs and the outer jacket fit the kit’s threaded housings.

STARGEAR lists 22 AWG Cat6 for the external cable in its product guidance. Confirm the cable construction and total run length for your installation before ordering, especially if you plan a long route.

Measure the route around corners and through cable openings before choosing a length. Check that the RJ45 plugs can pass through each opening along the way.

Keep a little slack near each connection so that the cable does not pull on either plug. Pick a route that leaves the joins accessible for inspection.

Make the Connections with the Power Off

Disconnect power before fitting the Starlink FHP RJ45 Adapter Pair. Seat each proprietary plug in its matching port, then connect the RJ45 cable between the two adapters.

Fit the threaded housings and gaskets according to the kit instructions. Keep the joins sheltered and dry before restoring power, and check that the dish starts normally before securing the cable run.

Why You’ll Love It

  • One adapter for the dish and one for the power supply.
  • Female RJ45 sockets accept a compatible cable you provide.
  • Two threaded housings cover the RJ45 joins.
  • Tethered caps cover the RJ45 sockets when disconnected.
  • Keep the original Starlink cable intact.
    Two graphics below are mislabeled “Enterprise.” This kit fits the Starlink Flat High Performance dish and its dedicated power supply.
    Starlink FHP RJ45 Adapter Pair laid out with separate threaded housings and end caps

    Two black Flat High Performance SPX adapter leads with tethered RJ45 caps and separate threaded housings RJ45 plug aligned with an adapter socket, with the threaded housing and red gasket in view Three close-ups of an SPX plug, black cable jacket and red housing gasket Joined RJ45 housing and tethered cap shown beside four weather scenes Flat High Performance dish beside comparison images of round, Standard Actuated, Standard and Enterprise dishes Starlink FHP RJ45 Adapter Pair with housings and caps beside camping, RV, cabin and indoor scenes

FAQ

Q1: Which kit fits the Starlink FHP RJ45 Adapter Pair?

A1: It fits the Flat High Performance dish and its dedicated power supply from the kit Starlink now calls Performance (Gen 2).

Q2: Can I use any RJ45 cable between the two adapters?

A2: Use a compatible cable with RJ45 plugs at both ends. Confirm the cable gauge, jacket fit and total route length with STARGEAR.

Q3: Can I plug a router or ordinary PoE injector into the dish-side run?

A3: Keep the dedicated Flat High Performance power supply in place. Use its separate Ethernet connection for your router, following the Starlink kit guide.

Q4: Can I leave the RJ45 joins exposed to rain?

A4: Keep the joins sheltered and dry. The threaded housings and gaskets cover the RJ45 connections, and the caps cover the sockets when disconnected.

Q5: What comes with the Starlink FHP RJ45 Adapter Pair?

A5: You receive the two adapter leads, threaded RJ45 housings, gaskets and end caps. Supply your own compatible RJ45 cable, dish and power supply.

Reviews

There are no reviews yet.

Be the first to review “Starlink Flat High Performance SPX to RJ45 Adapter Pair”

Your email address will not be published. Required fields are marked *

Secure Payments
Secure Payments. Encrypted & Protected.
Worldwide Shipping
Shipping to 200+ Countries & Regions.
Gifts & Sales
Curated Gifts for Every Occasion.
24/7 Support
Live Support via Chat, Email, or Phone.

Starlink FHP RJ45 Adapter Pair with black SPX leads, threaded housings and end caps
Starlink Flat High Performance SPX to RJ45 Adapter Pair

$105.99

Add to cart