Starlink Mini Adjustable Clamp Mount Kit with Silicone Case
$109.99
The STARGEAR kit pairs a fitted silicone case and carry handle for Starlink Mini with an adjustable clamp for round rails 1–1.6 in across. Two ball joints let you adjust the dish angle, and the detachable shoulder strap makes the dish easier to carry between setups.
| Brand | STARGEAR |
|---|---|
| Model Name | SG-STG99D |
| Compatible Device | Starlink Mini |
| Color Options | Black, Grey |
| Case Material | Silicone |
| Constructed Clamp Material | Aluminum Alloy |
| Round Rail Outside Diameter | 1–1.6 in (Approx. 25.4–40.6 mm) |
| Ball Joint Size | 1.5 in |
| Threaded Mounting Points | 7 Built-In 1/4″-20 Threaded Inserts |
| Item Weight | 1.15 kg |
| Included Components | 1 Silicone Case with Carry Handle and Base, 1 Adjustable Clamp Assembly with Ball and Linkage Arm, 1 Detachable Shoulder Strap |
| Unit Count | 1 Kit |
Set Up on a Round Rail with the Starlink Mini Clamp Mount Kit
The STARGEAR Starlink Mini Clamp Mount Kit combines a silicone case, carry handle and adjustable rail clamp in one set. Choose a Black or Grey case for your Starlink Mini.
Use the clamp on a suitable fixed round rail when you’re parked or docked. The case can stay on the dish when you take it off the clamp to carry it.
Measure the Rail Before You Order
This Starlink Mini rail mount fits round rails with an outside diameter of 1–1.6 in, or about 25.4–40.6 mm. Measure across the outside of the rail where you plan to attach it.
Choose a fixed rail suitable for mounting equipment. Check that the clamp jaws can sit evenly and that the dish has room to tilt without touching the rail or nearby equipment.
Fit the Starlink Mini Clamp Mount Kit
Remove the Mini kickstand, fit the Starlink Mini silicone case and slide the included base into the rear mounting slot until it seats. Check the base is engaged before lifting the dish.
Attach the supplied ball, linkage arm and clamp as shown in the installation diagram. The dual ball joint mount uses 1.5-inch balls to let you adjust the dish angle at both ends.
Tighten the clamp around the rail and tighten the arm after setting the angle. Check the case, base, arm and clamp before letting go of the dish.
Carry the Mini and Route Its Cable
The Starlink Mini Clamp Mount Kit includes a case with a rigid carry handle and a detachable shoulder strap. Fit the strap for shoulder carry or use the handle for short moves.
The rear compartment has a magnetic lid for small accessories or a coiled cable. A cable opening lets you connect your existing Mini power cable with the case fitted.
Use the Threaded Inserts With Matching Hardware
The base has seven built-in 1/4″-20 threaded inserts for matching attachments. The supplied adjustable clamp for Starlink Mini uses the included ball and arm assembly.
Suction cup mounts and magnetic feet pictured in the attachment diagrams are separate accessories. Choose hardware that matches both the thread and the intended mounting surface.
Why You’ll Love It
- A case and rail clamp come together in one kit.
- Two ball joints let you adjust the dish angle at either end of the arm.
- The clamp fits round rails 1–1.6 in across.
- The handle and detachable strap give you two ways to carry the Mini.
- The rear lid and cable opening keep small items and the power connection accessible.
The vehicle and weather images illustrate possible setups. Use the clamp while parked or docked and take down the dish and mount before driving or getting underway.

FAQ
Q1: What rail size fits the Starlink Mini Clamp Mount Kit?
A1: Measure the outside diameter where the clamp will sit. Choose a suitable fixed round rail between 1 and 1.6 inches across, about 25.4–40.6 mm.
Q2: What comes with the kit?
A2: It includes the silicone case with carry handle and base, the adjustable clamp assembly and a detachable shoulder strap. You supply the Starlink Mini and its power equipment.
Q3: Can I use it with a Starlink Standard dish?
A3: Choose this kit for Starlink Mini. The case fits the Mini housing and its rear mounting slot. Standard 4 and Standard 4 X dishes use different mounts.
Q4: Can I use the threaded points with other mounts?
A4: The seven 1/4″-20 inserts accept matching hardware. Check the attachment and fit before use. Suction cups and magnetic feet shown in the images are separate accessories.
Q5: Can I use the Starlink Mini Clamp Mount Kit while driving or sailing?
A5: Use it on a suitable fixed rail with the vehicle parked or the boat docked. Take down the dish and mount before driving or getting underway.
| Color | Black, Grey |
|---|




























Reviews
There are no reviews yet.