Starlink Mini Fixed Magnetic Mount with Four Feet and Locking Screws

Original price was: $99.99.Current price is: $89.99.

The Starlink Mini Fixed Magnetic Mount uses four 66 mm feet in fixed positions to attach to suitable flat steel without drilling. Its aluminum alloy frame holds the Mini at a built-in 8° tilt, and tool-operated locking screws secure the dish in its cradle. Use it while parked or docked.

Brand / ManufacturerSTARGEAR
Model NameSG-MINI-4LegMount-BK
Compatible DeviceStarlink Mini
VersionBasic Mount with fixed-position magnetic feet
ColorBlack frame with gray cradle
Frame MaterialAluminum alloy
Magnetic Feet4 round feet, 66 mm diameter each
Direct Mounting SurfaceSuitable flat magnetic steel
TiltFixed 8° relative to the mounting surface
Special FeatureTool-operated dish locking screws
Included ComponentsMount assembly with cradle, four magnetic feet, two locking screws and one screwdriver
Listed Item Dimensions (L × W × H)12.72 × 9.53 × 2.17 in
Unit Count1 kit
Category: Brand:

Starlink Mini Fixed Magnetic Mount for Flat Steel

The Starlink Mini Fixed Magnetic Mount gives the Mini a mounting position on suitable flat steel where all four magnetic feet can sit flush. The black frame and gray cradle come as one mounting kit.

Check the Footprint Before You Order

This fixed-foot magnetic mount has one mounting position for each of its four 66 mm feet. Measure the usable flat area on your panel before you choose a mounting spot.

Use the Starlink Mini Fixed Magnetic Mount on a clean steel panel that attracts magnets. Check for clear space around the frame, the dish and its cable exit.

Compare the magnet center positions in the product diagram with the flat areas on your panel. Use the listed overall dimensions to check clearance around the frame.

Roof ribs, seams and raised trim can keep a foot from sitting flat. If the feet cannot all make full contact, choose another spot or a mount suited to that surface.

Seat the Dish and Tighten the Locking Screws

Place the Starlink Mini Fixed Magnetic Mount on the checked surface. Route your Mini power cable through the cradle opening before fitting the dish, leaving enough slack to reach the port.

Connect the cable and seat the Mini in the cradle according to the installation guide. Use the supplied screwdriver to snug the dish locking screws without overtightening them.

The mounted cradle holds the dish at a built-in 8° tilt relative to the mounting surface. Allow clearance for the raised edge of the dish when choosing a position.

Loosen the locking screws to remove the Mini. Hold the dish while disconnecting power, and lift the frame from the panel before you move the vehicle or boat.

Choose a Surface for Your RV or Boat Setup

For a Starlink Mini RV roof mount or docked boat setup, choose a rigid panel clear of hatches, doors and other equipment. Use the Starlink Mini Fixed Magnetic Mount while parked or docked, with a clear view of the sky for the Mini.

For aluminum or glass, select separately sold contact plates or a mounting system suited to that surface. Check that the plate layout allows all four feet to sit flat before use.

Recheck the contact under each foot if you set up in a different spot. Keep the power cable clear of pinch points and avoid pulling on the connector.

Why You’ll Love It

  • Four round 66 mm magnetic feet with fixed positions.
  • No drilling for direct placement on suitable flat steel.
  • Aluminum alloy frame with a built-in 8° tilt.
  • Tool-operated locking screws secure the Mini in its cradle.
  • The kit includes a screwdriver for the locking screws.Starlink Mini Fixed Magnetic Mount beneath the dish with four round feet highlighted Side-by-side roof views of the mounted Mini and the empty gray cradle

    Black frame and gray cradle shown in illustrated water and sand scenes Magnetic frame diagram showing spacing between the feet beside two screws and a screwdriver Starlink Mini highlighted in a dish comparison with three other Starlink models

FAQ

Q1: What else do I need to use this mount?

A1: The Starlink Mini Fixed Magnetic Mount includes the cradle, magnetic frame, four feet, locking screws and screwdriver. Bring your own Mini, power cable and power source.

Q2: Can the four magnetic feet be moved to suit a ribbed roof?

A2: The feet have fixed positions. Choose a smooth section large enough for all four feet, or select a mount made for your roof profile.

Q3: Can the magnets attach directly to aluminum or glass?

A3: Direct attachment requires suitable magnetic steel. For glass or aluminum, use compatible steel contact plates or a mounting system specified for the surface.

Q4: Does lockable mean the mount has a key?

A4: The Starlink Mini Fixed Magnetic Mount uses tool-operated screws to retain the dish in its cradle. Use the supplied screwdriver to release them.

Q5: Can I use it on an RV or boat?

A5: Yes, on a suitable flat steel surface while parked or docked. Check contact at all four feet and stow the dish and mount before travel.

Reviews

There are no reviews yet.

Be the first to review “Starlink Mini Fixed Magnetic Mount with Four Feet and Locking Screws”

Your email address will not be published. Required fields are marked *

Secure Payments
Secure Payments. Encrypted & Protected.
Worldwide Shipping
Shipping to 200+ Countries & Regions.
Gifts & Sales
Curated Gifts for Every Occasion.
24/7 Support
Live Support via Chat, Email, or Phone.

Starlink Mini on a vehicle roof above a black four-foot frame, gray cradle and screwdriver
Starlink Mini Fixed Magnetic Mount with Four Feet and Locking Screws

Original price was: $99.99.Current price is: $89.99.

Add to cart