Starlink 80mm Magnetic Mount Plates, 4mm Thick, 4-Pack

$46.99

Give your compatible Starlink Mini or Gen 3 magnetic mount four metal contact points on a suitable aluminum or glass roof. Each silver plate is 80 mm across and 4 mm thick, with adhesive backing and predrilled holes for screw mounting where the panel permits.

BrandSTARGEAR
Model NumberSGHK-METALPADS-CNCD80
Product TypeMetal plates for magnetic mounts
MaterialMetal
ColorSilver
FinishCNC-machined with a honeycomb pattern
Plate Size80 mm diameter × 4 mm thick per plate
Mounting OptionsAdhesive backing or screw mounting on suitable panels
Compatible MountsSeparate Starlink Mini or Gen 3 magnetic mounts with four feet that fit the plates
Included Components4 metal plates
Unit Count1 set / 4 plates
Category: Brand:

Metal Plates for Magnetic Mounts on Vehicle Roofs

STARGEAR Starlink 80mm Magnetic Mount Plates give the feet of a compatible magnetic mount a metal surface to grip on a suitable aluminum or glass roof. Each round plate measures 80 mm across and 4 mm thick, with adhesive backing and predrilled screw holes so you can choose a method suited to your panel.

Check the Fit of Your Mount

Use the four plates with a separate Starlink Mini magnetic mount or a compatible Gen 3 magnetic mount that has four feet. The magnet is part of the mount, and the plates sit beneath the feet to create four contact points on a roof that magnets cannot grip directly.

Before installing the Starlink 80mm Magnetic Mount Plates, set the mount and plates in position to check the spacing and make sure each foot sits flat. Measure the entire contact area of each foot, allowing for the plate’s scalloped edge and screw holes when you check whether the foot will fit.

Apply the Adhesive Backing

On a suitable flat aluminum or glass panel, choose adhesive mounting when you want to keep the roof free of drilled holes. Clean and dry the surface, remove dust and oil, then peel the backing and press each of the adhesive metal plates firmly into position.

The product instructions call for a 24-hour wait before attaching the mount. Allow any additional bonding time specified for your surface and installation conditions.

If your roof is fiberglass, verify that the adhesive is suitable for the exact finish before choosing this installation method.

Use the Screw Holes Where Your Panel Allows

Each plate has four holes for screw mounting on a panel approved for mechanical fasteners, so you can mark the locations after checking foot alignment. Use fasteners suited to the panel and follow the vehicle manufacturer’s installation guidance.

Choose the adhesive method on suitable glass.

Why You’ll Love It

  • Four plates for a magnetic mount with four matching feet.
  • Each plate measures 80 mm across and 4 mm thick.
  • Adhesive backing for a no-drill setup on a suitable surface.
  • Predrilled holes for screw mounting on suitable panels.
  • Silver finish with a visible honeycomb pattern.

Set Up While Parked

Use the Starlink 80mm Magnetic Mount Plates while parked, and remove the dish and magnetic mount before driving.

Starlink 80mm Magnetic Mount Plates with dimensions, adhesive and screw mounting diagrams, and vehicle roof examples

FAQ

Q1: Which Starlink mounts do these plates fit?

A1: Use the Starlink 80mm Magnetic Mount Plates with a compatible Mini or Gen 3 magnetic mount whose four feet sit fully on the plates.

Q2: Are the plates magnets, and is the mount included?

A2: The magnets are in your separate mount. This four-pack contains metal plates that give the magnetic feet a surface to grip.

Q3: Are there different plate sizes in this set?

A3: All four plates in the set measure 80 mm across and 4 mm thick. Measure the mount’s feet before ordering.

Q4: Do I need to drill holes to use the plates?

A4: The Starlink 80mm Magnetic Mount Plates can be applied with adhesive on suitable flat surfaces. Use screws only where the panel allows them.

Q5: Can I leave the dish on the roof while driving?

A5: Use these plates while parked. Remove the dish and its magnetic mount before driving.

Reviews

There are no reviews yet.

Be the first to review “Starlink 80mm Magnetic Mount Plates, 4mm Thick, 4-Pack”

Your email address will not be published. Required fields are marked *

Secure Payments
Secure Payments. Encrypted & Protected.
Worldwide Shipping
Shipping to 200+ Countries & Regions.
Gifts & Sales
Curated Gifts for Every Occasion.
24/7 Support
Live Support via Chat, Email, or Phone.

Four silver honeycomb-patterned metal plates shown above a magnetic Starlink roof mount illustration
Starlink 80mm Magnetic Mount Plates, 4mm Thick, 4-Pack

$46.99

Add to cart